.jpg)
.jpg)
.jpg)
Spectra Microvee TM
Spectrum Microvee filters are rigidity constructed filters for coarse and fine particle capturing can be used as both primary and secondary stage filters depends on the class it is rated. The unique filter media is designed with layers of synthetic mesh that has non-woven sandwiched in between. The pleats are V shaped and rounded well to increase the dust arrestance of filters. Media is further enforced by metal expanded mesh to give extra rigidity to pleats so that peats would retain their shape at higher pressure drop. Equal spacing in pleats is maintained by use of metallic spacers.
CONTACT US
- Layer of filter media increases filter efficiency
- Rugged construction suitable for pre filtration
- Tested as per ISO 16890-16 in European laboratories
- Rating as per ISO Coarse
| EN779 | ASHRAE 52.2 | ISO 16890 | Width (mm) | Height (mm) | Depth (mm) | Initial Pressure Drop (Pa) | Air Flow (m3/hr) |
|---|---|---|---|---|---|---|---|
| M5 | MERV 10 | ePM 10 55% | 610 | 610 | 300 | 60 | 3400 |
| M5 | MERV 10 | ePM 10 55% | 305 | 610 | 300 | 60 | 1700 |
| M5 | MERV 10 | ePM 10 55% | 610 | 305 | 300 | 60 | 1700 |
| M5 | MERV 10 | ePM 10 55% | 305 | 305 | 300 | 60 | 850 |
| M5 | MERV 10 | ePM 10 55% | 610 | 610 | 150 | 60 | 1700 |
| M5 | MERV 10 | ePM 10 55% | 305 | 610 | 150 | 60 | 850 |
| M5 | MERV 10 | ePM 10 55% | 610 | 305 | 150 | 60 | 850 |
| M5 | MERV 10 | ePM 10 55% | 305 | 305 | 150 | 60 | 500 |
| F7 | MERV 13 | ePM10 85% | 610 | 610 | 300 | 80 | 3400 |
| F7 | MERV 13 | ePM10 85% | 305 | 610 | 300 | 80 | 1700 |
| F7 | MERV 13 | ePM10 85% | 610 | 305 | 300 | 80 | 1700 |
| F7 | MERV 13 | ePM10 85% | 305 | 305 | 300 | 80 | 850 |
| F7 | MERV 13 | ePM10 85% | 610 | 610 | 150 | 80 | 1700 |
| F7 | MERV 13 | ePM10 85% | 305 | 610 | 150 | 80 | 850 |
| F7 | MERV 13 | ePM10 85% | 610 | 305 | 150 | 80 | 850 |
| F7 | MERV 13 | ePM10 85% | 305 | 305 | 150 | 80 | 500 |
SHOW MORE
Specification
Application
Gas Turbine, Compressor and harsh enviroments
Filter Frame
Al/SS 304
Media
Synthetic media
Max Temperature (°C)
70°C
Recommended Final
Pressure Drop (Pa)
600
Related Products
Dust Collector
Spectra Dust Collector filter pad is progressive density fiber glass allows the pollutant to penetrate deep into the media, along with the harmless tackifier over the fibers arrest the pollutant and make it stick together. The filter pads can be constructed with suitable frames depend on the use of the application.
Drop Shield
Drop Shield filters serve as an excellent pre and final filter for application in Gas turbines and compressors. They efficiently remove airborne particulate matter, snow, mist and fog, acting as a filter and a cleanser in one. DS rigid filters are specially designed for the elimination and drainage of free water and airborne salt crystals. Wherever placed, subsequent final filters protect not only from coarse dust but also from running in wet conditions, thus significantly prolonging their life and increasing their operational safety.
.jpg)
Spectra Cell TM
Ruggedly constructed, heavy duty, high efficiency filter. A special dual layer, graded density media ensures extremely high dust holding capacity & therefore lower operating pressure loss.
Spectra Pre-TM
Spectra Pre-TM filters are used for supply, exhaust and circulating air filtration in a Turbine application which built for high dust holding capacity, used in all industrial gas turbine and compressor application. Where subsequent final filters are placed, they protect them from coarser dust and fog, thus significantly prolonging their life and increasing their operational safety.