.jpg)
Reverse HP Pocket
Reverse HP pocket filters are unique premium coalescer pre-filters in reverse air flow direction. Reverse HP pocket filters serve as efficient pre or final filters in air intake systems of Gas turbines in any environmental condition (including offshore, marine) and in any climate (including tropical). They efficiently remove airborne particulate matter but also snow, mist and fog acting as a filter and a coalescer in one. RHP filters are specially designed for the elimination of free water and airborne salt crystals. Where subsequent final filters are placed, they protect them not only from coarse dust but also from running in wet conditions.
CONTACT US
- Reverse premium hydrophobic pocket media
- The depth loading media is made of a progressive structure for high dust holding capacity and contains a permanent hydrophobic treatment and tackifier throughout the medium depth to repel water and retain their operational safety.
| EN779 | ASHRAE 52.2 | ISO 16890 | Width (mm) | Height (mm) | Depth (mm) | Initial Pressure Drop (Pa) | Air Flow (m3/hr) | No of Pockets |
|---|---|---|---|---|---|---|---|---|
| G4 | MERV 8 | ISO Coarse 60% | 595 | 595 | 330 | 45 | 3400 | 6 |
| G4 | MERV 8 | ISO Coarse 60% | 595 | 595 | 485 | 40 | 3400 | 6 |
Specification
Application
Gas Turbine, Compressor and harsh enviroments
Filter Frame
PU
Media
Hydrophobic synthetic media
Max Temperature (°C)
70°C
Recommended Final
Pressure Drop (Pa)
600
Related Products
Dust Collector
Spectra Dust Collector filter pad is progressive density fiber glass allows the pollutant to penetrate deep into the media, along with the harmless tackifier over the fibers arrest the pollutant and make it stick together. The filter pads can be constructed with suitable frames depend on the use of the application.
Drop Shield
Drop Shield filters serve as an excellent pre and final filter for application in Gas turbines and compressors. They efficiently remove airborne particulate matter, snow, mist and fog, acting as a filter and a cleanser in one. DS rigid filters are specially designed for the elimination and drainage of free water and airborne salt crystals. Wherever placed, subsequent final filters protect not only from coarse dust but also from running in wet conditions, thus significantly prolonging their life and increasing their operational safety.
.jpg)
Spectra Cell TM
Ruggedly constructed, heavy duty, high efficiency filter. A special dual layer, graded density media ensures extremely high dust holding capacity & therefore lower operating pressure loss.
.jpg)
Spectra Microvee TM
Spectrum Microvee filters are rigidity constructed filters for coarse and fine particle capturing can be used as both primary and secondary stage filters depends on the class it is rated. The unique filter media is designed with layers of synthetic mesh that has non-woven sandwiched in between. The pleats are V shaped and rounded well to increase the dust arrestance of filters. Media is further enforced by metal expanded mesh to give extra rigidity to pleats so that peats would retain their shape at higher pressure drop. Equal spacing in pleats is maintained by use of metallic spacers.